|
|
Radio System FAQ
How do I keep from overdriving my throttle servo when using an elevator-to-throttle or aileron-to-throttle mix?
The easiest approach is to run a governor instead of the mixes you describe. However, if you chose not to run a governor, then you can:
- Unplug your throttle servo horn
- Push the ATV of the Throttle up to the max value (+140)
- Push the subtrim of the ATV at the limit (opening the carb, sign depending on your helicopter/engine combo)
- Replace the servo horn using the full throttle position as reference (the center position has been shifted !)
- Modify your low ATV to match the carb travel (closed position)
Now you can activate 2 PMIX (one for ELEV->THRO and one for AILE->THRO) without binding anything.
Back to main FAQ/Contact Info page
|
|
