Radio System FAQ

To deactivate the knob (or gear switch) we will use a PMIX and essentially you are telling the radio that for every 1% the knob is turned move the servo 1% the opposite direction to counter this turning of the knob. (We are mixing the channel to itself -100%.) This will deactivate the knob without affecting any of your other features. For this example, we are turning off the channel 6 knob. (You use an identical mix, but channel 5 to channel 5, to turn off the gear switch.)

___ 1. Press the 2 advanced menu keys.

___ 2. Mode up or down until you get to an open PMIX, lets assume PMIX 2 is available.

___ 3. Press the + key to turn the mix on.

___ 4. Press the cursor key to get to the first channel screen.

___ 5. Press the + key until it reads FLP.

___ 6. Cursor over to the second channel screen.

___ 7. Press the + key until it reads FLP.

___ 8. Cursor over to the % screen.

___ 9. Turn the channel 6 knob all the way to the left.

___ 10. Set the % at -100%.

___ 11. Turn the channel 6 knob all the way to the right.

___ 12. Set the % at -100%.

___ 13. Cursor over to link.

___ 14. Ppress plus to turn link on.

___ 15. Cursor over to offset.

___ 16. Leave offset at 0.

___ 17. Cursor over to switch assignment.